AEB on R10: Is it really ment to be this difficult?

[Martin-H]

Hi.
Joined today, because I have just bought a R10.
Coming from a Panasonic LX100. That had a AEB (automatic exposure bracketing) which could be switched on and off very easily, two clicks, and it remembered the settings, no need to define each time it was activated. I used it a lot.
But on the R10 it seems like I each time have to:
- go into menu and both activate and set the desired settings for AEB
- AND I also have to activate continuous shooting (or whatever it is called in English)
To go back to single-shot, both steps has to be done again.
Is this really how it is ment to be?

Another finding: I did configure the quick-menu setup (directly translated from Norwegian, the one activated with the Q/Set button), saved it, but the camera does not remember this setup after switching it off. It goes back to default setup. No point in configuring this menu if it does not remember....

Martin
Norway

 

[Martin-H]

It’s this one:
View attachment 27753

Nope, don't have that.

 

[AntonLargiader]

And yes, I agree that the camera should automatically do a complete burst for however many shots your bracket is set up for. Otherwise you aren't really shooting a bracket for each intended shot. However, leaving the camera always set to the slowest continuous shooting mode and shooting one if you're not in AEB and three if you are in AEB is pretty simple, too.