The latest firmware for the Canon R10 is now version 1.7.0
Table of Contents[Hide][Show]
Canon R10 Forum & Facebook Group
If you are looking for further help and advice on the Canon R10 or would simply like to share your photos and videos, then please head over to our friendly Forum. If you prefer Facebook then we also run the Canon R10 Shooters Group.
What’s New in Firmware Version 1.7.0
Firmware Version 1.7.0 incorporates the following enhancements and fixes:
1. Improves security features. A password must be set initially.
•Adds the ability to review the history of any changes made to the password, network information, or other settings.
*For more information, please refer to the ‘Setting a Password’ section in the Advanced User Guide on cam.start.canon.
2. Enables firmware updates to be performed when the camera is connected to the internet and new firmware is made available on Canon servers.
3. Fixes an issue in which the camera may become unresponsive after simultaneously pressing a button assigned to [One-Shot AF→Servo AF] and the shutter button.
4. Fixes an issue in which image stabilization may stop working when using an EF lens.
If the camera’s firmware is already Version 1.7.0, it is not necessary to update the firmware.
Firmware Download
You can download the latest R10 firmware from Canon’s Support Sites:
Make sure that you download the correct firmware for your computer (Windows or Mac).
How to Update the Canon R10 Firmware
Updating the firmware for the Canon R10 is pretty straight forward.
When you download and unzip the firmware it will include a PDF guide on how to install the firmware.
There are two methods described in this guide, we would recommend using the memory card method. You simply copy the firmware to the root directory of a memory card (don’t put it in a folder), then insert into your R10 and run the update from the setup menu.
If you are downloading to a Mac then when you click on the .dmg file it will mount a drive in finder where you will find the files.
Previous Firmware Versions
The latest version will always include the previous updates. So even if you have missed 5 firmware updates, you only need to install the most recent update.
Firmware Version 1.6.0
Firmware Version 1.6.0 incorporates the following enhancements and fixes:
1. Adds the ability to select [WPA2] and [WPA3] as a secured protocol.
2. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
3. The following issues have been fixed.
3-1. Fixes an issue, in which when SPEEDLITE EL-5, EL-10 is attached, the “Accessory unavailable status” message may be displayed when restarting after the camera has gone into Auto Power Off. (Only occurs with firmware Ver.1.5.0)
3-2. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.
Firmware Version 1.5.0
Firmware Version 1.5.0 incorporates the following enhancements and fixes:
1. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
2. The following issues have been fixed.
2-1. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
2-2. Fixes an issue that, under specific circumstances and in rare instances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
2-3. Fixes an issue that may result in Error Code 70 being displayed when the user is shooting in A+ Mode or with the camera set to AI Focus AF.
2-4. Fixes an issue that may cause the card access lamp to start flashing and the camera to not operate normally when shooting small subjects.
2-5. Fixes an issue that may cause the camera to continue shooting when the user presses the shutter button and another button at the same time.
Firmware Version 1.4.0
Firmware Version 1.4.0 incorporates the following enhancements and fixes:
- Adds support for RF-S10-18mm F4.5-6.3 IS STM lens.
- Fixes minor issues.
Firmware Version 1.3.0
Firmware Version 1.3.0 incorporates the following enhancements and fixes:
- Adds support for Speedlite EL-5. (*The automatic light intensity adjustment of the AF-assist beam is not supported.)
- Adds support for the RF-S55-210mm F5-7.1 IS STM.
- Fixes minor issues.
Firmware Version 1.2.0
Firmware Version 1.2.0 incorporates the following enhancements and fixes:
- The [User Def.] on [Picture Style] can now be selected in the Cloud Raw image processing settings.
- Fixes an issue that, in rare instances, displays an Error Code 70 when the camera is capturing small subjects.
- Fixes minor issues.
Firmware Version 1.1.0
Firmware Version 1.1.0 incorporates the following enhancement:
- Supports Cloud RAW image processing *
* Please note the following:
- It is necessary to purchase a subscription plan for Cloud RAW image processing from Canon. The service will start on July 25.
- Please note that before the firmware is updated, images added using the [Add images to process] option cannot be processed, so please use the [Check/remove selected images] option to cancel image processing.
- Please use the [Add images to process] option again only after having updated the firmware to Version 1.1.0.
Release Firmware Version 1.0.0
Version 1.0.0 was the firmware version that the R10 was released with.
Leave a Reply