The latest firmware for the Canon R50 is now version 1.3.0
Canon R50 Forum & Facebook Group
If you are looking for further help and advice on the Canon R50 or would simply like to share your photos and videos, then please head over to our friendly Forum. If you prefer Facebook then we also run the Canon R50 Shooters Group.
What’s New in Firmware Version 1.3.0
Firmware Version 1.3.0 incorporates the following enhancements and fixes:
1. Adds the ability to select [WPA2] and [WPA3] as a secured protocol.
2. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
3. The following issues have been fixed.
3-1. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.
If the camera’s firmware is already Version 1.3.0, it is not necessary to update the firmware.
Firmware Download
You can download the latest R50 firmware from Canon’s Support Sites:
Make sure that you download the correct firmware for your computer (Windows or Mac).
How to Update the Canon R50 Firmware
Updating the firmware for the Canon R50 is pretty straight forward.
When you download and unzip the firmware it will include a PDF guide on how to install the firmware.
There are two methods described in this guide, we would recommend using the memory card method. You simply copy the firmware to the root directory of a memory card (don’t put it in a folder), then insert into your R50 and run the update from the setup menu.
If you are downloading to a Mac then when you click on the .dmg file it will mount a drive in finder where you will find the files.
Previous Firmware Versions
The latest version will always include the previous updates. So even if you have missed 5 firmware updates, you only need to install the most recent update.
Version 1.2.0
1. Adds [FEM] to [Flash C.Fn settings]. Also, adds [ON/ETTL→M] to [Customize buttons]. Enables the ability to set Flash exposure memory (FE memory) from the camera when using Speedlites without an LCD panel.
2. The following issues have been fixed.
2-1. Fixes an issue that may cause the camera, in rare instances, to experience a delayed restart after the camera has gone into Auto Power Off.
2-2. Fixes an issue that, under specific circumstances and in rare instances, may prevent the image from being displayed in the viewfinder or on the screen causing the camera to stop operating, or Error Code 70 may be displayed.
2-3. Fixes an issue that may result in Error Code 70 being displayed when the user is shooting in A+ Mode or with the camera set to AI Focus AF.
2-4. Fixes an issue that may result in the external flash output level not being adjustable when using the control ring.
2-5. Fixes an issue that may cause the card access lamp to start flashing and the camera to not operate normally when shooting small subjects.
2-6. Fixes an issue that may cause the camera to continue shooting when the user presses the shutter button and another button at the same time.
Version 1.1.0
1. Adds support for RF-S10-18mm F4.5-6.3 IS STM lens.
2. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
3. Fixes minor issues.
Version 1.0.0
Version 1.0.0 was the firmware version that the R50 was released with.
Leave a Reply