Finally took the plunge and ordered an R3 and have spent the last few days setting up the camera.
I have noticed a couple of things, firstly, the top shutter speed of 1/64000 doesnt seem to be available in Aperture Priority mode. The shutter speeds are maxed out at 1/8000, however, in Shutter Priority and manual modes, I can access all speeds up to 1/64000.
Another issue I have found is related to image stabilisation. When I attach image stabilised RF lenses to the R3, the camera shows the IS is turned on but I cannot get sharp shots at slower shutter speeds. I’ve tested a couple of IS RF lenses and none of them seem to be working. I also have an R6 and all lenses work perfectly on that body. I can can successfully hand hold down to as long as a couple of seconds, fairly consistently, but with the R3, I struggle to get sharp shots at 1/15th.
I also can report that with the RF 50mm f1.8, I can get sharper shots with the image stabilisation turned off in camera.
Something is not quite right. Anyone have the same issues?
Firmware v1.2.1
