Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Are you, by chance, a former Nikon user like me? LOLI can not for the life of me put on the camera cap cover on either R5/R7. Is there a secret? this has become very frustrating.
Similar to R5. Mark on cap to left of R5 on photo needs to line up with red mark on camera. Have fun.I can not for the life of me put on the camera cap cover on either R5/R7. Is there a secret? this has become very frustrating.
This is the same for the lens back covers as well on the new RF lenses. They are "keyed" in one spot only. On the old camera body and aft lens caps the lens cap could be rotated until the cap engaged with one of three positions corresponding to the flanges on both the lenses and the camera body. That was easily done without looking at the older EF mount. The newer RF mount is keyed in one location only for the caps. This is not an improvement from the "user perspective" IMHO.Are you, by chance, a former Nikon user like me? LOL
There's a line on the cap that must be at the top of the lens mount to go on, unlike Nikon that allows it to go on from several positions. I've taken a silver Sharpie marker and gone over the line so it's easy to see when I go to put it on. Even then it's still frustrating after 20 months post-switch.
Agreed but it was easier to install the caps without looking on EF series mount.It wouldn't be a problem if the markers were more visible but they are hidden on some caps/covers.